Doctoral Researchers |
Umut Akquzel
University of Canterbury
PhD Candidate
2006 – 2009
Fibre reinforced polymers (FRP) for seismic rehabilitation
of rc beam-column joint
|
Tom Algie
University of Auckland
PhD Candidate
2007 – 2010
Insitu testing of structures with rocking foundations.
|
Razak Abdul Karim
University of Auckland
PhD Candidate
2008 - 2011
Performance and retrofit of timber diaphragms in URM buildings. |
Gabriele Attanasi
Uni Canterbury/ROSE School
PhD Candidate (formerly M.E at Uni of Pavia)
2007 – 2010
Sectional analysis of FRP retrofit of beam and beam-column joint |
Anna Brignola
Uni of Canterbury / Uni of Genoa
PhD Candidate
2006 – 2009
Assessment and retrofit of timber diaphragm in unreinforced masonry structures |
Hossein Derakhshan
University of Auckland
PhD Candidate
2007 – 2010
Out-of-plane response and retrofit of URM structures |
Dmytro Dizhur
University of Auckland
PhD Candidate
2008 - 2011
Field testing of URM buildings. |
Temitope Egbalakin
University of Auckland
PhD Candidate
2008 - 2011
Retrofit decision making variables |
Debra Gardiner
Uni of Canterbury
PhD Candidate
2007 – 2010
Design for Internal Forces within Concrete Floor Diaphragms |
Giovacchino Genesio
Uni of Canterbury/ Uni of Stuttgart
PhD Candidate
2006 – 2010
Modelling beam column joints before/after retrofit |
Anas Ibrahim
University of Auckland
PhD Candidate
2008 - 2011
-to be added- |
Najif Ismail
University of Auckland
PhD Candidate
2008 - 2011
Shotcreting and post-tensioning retrofit solutions for URMs. |
Reza Jafarzadeh
University of Auckland
PhD Candidate
2008 - 2011
Assessment and retrofit of unique URM structures. |
Weng Yuen Kam
University of Canterbury
PhD Candidate
2006 - 2009
Selective weakening and external post-tensioning retrofit for rc beam-column joint. |
Charlotte Knox
University of Auckland
PhD Candidate
2008 - 2011
Assessment and retrofit of masonry frames. |
Ronald Lumantarna
University of Auckland
PhD Candidate
2008 - 2011
Field testing of URM buildings. |
Hamid Mahmood
University of Auckland
PhD Candidate
2006 – 2009
FRP retrofitting of URM buildings |
Dion Marriott
University of Canterbury
PhD Candidate
2005 – 2009
Retrofit of RC structure with rocking walls with advanced materials. |
Majid Naderi
University of Auckland
PhD Candidate
2007 – 2010
Performance of concrete encased steel riveted frames. |
Claudio Oyarzo Vera
University of Auckland
PhD Candidate
2007 – 2010
Predictive assessment of masonry structures. |
Patricio Quintana- Gallo
University of Canterbury
PhD Candidate
2009 - 2011
Experimental investigation of seismic performance of rc frame before and after retrofit |
Alistair Russell
University of Auckland
PhD Candidate
2006 - 2009
Unreinforced Masonry buildings in New Zealand. |
Lina Sa'Don
University of Auckland
PhD Candidate
2007 – 2010
Predictive assessment of masonry structures. |
Aaron Wilson
University of Auckland
PhD Candidate
2007 - 2010
Field testing of URM buildings. |
Fei Ying
University of Auckland
PhD Candidate
2005 - 2008
Project Management, Engineering Management |
Mohammed Reza Zare
University of Auckland
PhD Candidate
2008 - 2011
Project Management, Engineering Management |
|
|
Graduate (M.E.) Researchers |
Jawad Arefi
University of Canterbury / ROSE School
M .E. Student
2007 – 2008
Influence of SSI on retrofit of existing rc frames |
Alistair Boys
University of Canterbury
M .E. Student
2006 – 2007
Seismic performance of poorly detailed RC gravity columns |
Tsiu Te Chen
University of Canterbury
M .E. Student
2004 – 2006
Metallic haunch solutions for RC frame systems |
Martin Cooper
University of Auckland
M.E. Student
2005 – 2006
Influence of axial compression forces
elongation. |
Mario Galli
University of Canterbury
M .E. Student
2004 – 2006
Numerical modelling of rc frames with and without infills |
Cass Goodwin
University of Auckland
Masters Student
2008 - 2009
Architectural considerations for seismic retrofit. |
Eric Hertanto
University of Canterbury
M .E. Student
2004 – 2006
Response of Pre-1970 RC Beam Column Joints |
Matthew Ireland
University of Canterbury
M .E. Student
2005 – 2006
Selective weakening for the seismic retrofit of
R.C. walls. |
James Jensen
University of Canterbury
M.E. Student
2005 – 2006
Retrofits for existing Hollowcore seating
connections. |
Boris Marquois
University of Auckland
Lab Assistant
2007
Testing of URM buidings |
Jeremy Toh
University of Auckland
M .E. Student
2007 – 2009
Seismic performance of shallow foundations |
Lisa Woods
University of Canterbury
M.E. Candidate
2006 – 2007
Negative bending moment of hollowcore floor |
Undergradutes Researchers |
Luke Clark
University of Auckland
B.E. Student
2004 – 2007
Strength of pre-1960 Unreinforced Masonry |
Ryan Fleming
University of Auckland
B.E. Student
2005 – 2008
Earthquake record selection. |
Hamish Gray
University of Auckland
B.E. Student
2003 – 2006
Strength of pre-1960 Unreinforced Masonry. |
Russell Green
University of Auckland
B.E. Student
2005 – 2008
Initial building assessment.
|
Rick Henry
University of Auckland
B.E. Student
2003 – 2006
Insitu testing of structures with rocking foundations. |
Yi-Wei Lin
University of Auckland
B.E. Student
2005 – 2008
URM material testing. |
Hamish MacKinven
University of Canterbury
B.E. Student
2003 – 2006
Sliding hinge joints for steel frame. |
John O'Hagan
University of Auckland
B.E. Student
2004 – 2007
Strength of pre-1960 Unreinforced Masonry. |
Hannah Schofield
University of Auckland
B.E. Student
2003 – 2006
Historical review of earthquake risk buildings |
Matt Willacy
University of Auckland
B.E. Student
2005 – 2008
Initial building assessment. |
Anderson Yu
University of Auckland
B.E. Student
2005 – 2008
URM material testing |
|
